Fire Alarm Control Panel

Fire Alarm Control Panel

Model : BF CK-1004/08/16


  • Four, Eight, Sixteen Zone Style B (Class B) Initiating Device Circuits (IDCs), all zones accept two-wire smoke detectors and any normally-open contact devices.
  • Two Supervisory Input with DC12V output, ideal to connect security alarm devices.
  • Three General Alarm, Trouble and Supervisory, Form A Relay Output.
  • One, Two, Four Built-in Sound Output, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs), NACs may be programmed: Silenceable or Non-Silenceable.
  • 3.0 amps of total system power. Resettable DC24V & Non-resettable DC24V Output.
  • Zone Input Short Circuit can be set to “Alarm” or “Fault” mode.
  • RS485 Communication Port (optional).
  • Automatic/Manual mode can be programmed.
  • Disable/Enable control per Zone (IDC) can be programmed.
  • Disable/Enable Sound Output (NACs) can be programmed.



  • AC POWER: 220VAC, 50 Hz.
  • BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp for normal flat charge. Maximum battery charger capacity: 18AH battery.
  • Two 10AH batteries can be housed in the cabinet. Larger batteries require a separate battery box.
  • Total DC24V system power: 3.0 amps.
  • Maximum current per NAC: 1.25 amps.
  • Maximum battery charging capability: 18 AH.
  • Re settable four-wire smoke detector power output.
  • Non-re settable power output.
  • Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 30 VDC
    (resistive), 2.0 amps @ 30 VAC (resistive)











Book Now

This will close in 20 seconds

Open chat