Hikvision Network Access Controller

Hikvision Network Access Controller

Model : DS-K2602

Features

  • 32-bit high-speed processor
  • TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure information security
  • The recognition and storage of card number with maximum 20 digits
  • Massive storage with100,000(can be expended to 200,000) cards information and 300,000 (can be expended to 600,000)access control events
  • Supports multi-door interlocking function anti-pass back function, multi-card function, first card function, super card and super password function
  • Online upgrade function and online remote control of the doors
  • Supports alarm event upload (including tamper-proof alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm)
  • Short circuit attempts alarm and open circuit attempts alarm
  • Supports zone alarm input
  • SupportsRS485 interface and Wiegand interface for accessing card reader. Wiegand interface supports W26/W34and is seamlessly compatible with third-party card reader with Wiegand interface
  • Supports various card types such as normal/ disabled/ blacklist/ patrol/ guest/ duress/super card, etc.
  • Various indicators to show differentiates
  • Supports time synchronization via NTP, manual or automatic method
  • Supports standby battery
  • Watchdog for device running status detection
  • Data can be permanently saved when the access controller is powered off

 

Description

Specification 

System Parameters
Storage: 100,000 cards(200,000 expandable) 300,000 events(600,000 expandable)
Capacity: 16M
Processor: 32-bit
Device Interfaces
Accessible Card Reader: 4 Card Readers (RS485 Interface) and 4 Card Readers (Wiegand Interface) Connectable
Uplink Communication Interface: TCP/IP Network Interface and RS-485 Interface
Downlink Communication Interface: RS-485 and Wiegand (W26/W34)
Output Interface: Lock Relay×2, Alarm Relay×4
Input Interface: Alarm Input×4,Door Sensor×2,Exit Button×2,Case Input×4,Tamper Alarm×1
General
Working Voltage: DC 12V/1A
Power Consumption: ≤4W(Without Load); ≤100W(with Load)
LED Indicator: Power Supply Status, Communication Status, Working Status
Certification: CE, FCC
Working Humidity: 10% to 90% (Non-Condensing)
Working Temperature : -20°C to +65°C (-4°F to +149°F)
Dimensions (L×W×H): 370mm x 345mm x 90 mm (14.6” x 13.6” x 3.5″)

 

 

 

 

 

 

 

 

 

 

Book Now


This will close in 20 seconds

Open chat